AMSOIL for Harley-Davidson and other V-twins
Disclosure: Superior Synthetic Oil is run by Jonathan Lackman, an Independent AMSOIL Dealer based in Denver, CO. Links to AMSOIL.com carry my Dealer referral number, and I earn a commission when you buy or join through them, at no extra cost to you. This is not the official AMSOIL website. Full disclosure.
Quick answer
For most Harley-Davidson V-twins, the core product is AMSOIL 20W-50 Synthetic V-Twin Motorcycle Oil. It’s wet-clutch compatible and can serve all three sumps. AMSOIL says it resists viscosity breakdown 6X better than Harley-Davidson SYN3. For a dedicated transmission fluid, AMSOIL offers V-Twin Transmission Fluid (MVT) and V-Twin Primary Fluid (MVP).
I’ve run AMSOIL in my Harley-Davidsons for years. V-twins are hard on oil: big air-cooled cylinders, heat soak in parade traffic, and on many models a separate transmission and primary with their own demands.
What goes in each hole
AMSOIL’s Harley-Davidson guide lays out these recommendations by engine family:
| Engine family | Engine | Transmission | Primary chaincase |
|---|---|---|---|
| Evolution 1340 – Twin Cam | 20W-50 | 20W-50 (or MVT V-Twin Transmission Fluid) | 20W-50 (or MVP V-Twin Primary Fluid) |
| Ironhead – Evolution Sportster / V-Rod | 20W-50 (shared engine/transmission/chaincase) | – | – |
| Shovelhead, Panhead, Knucklehead, Flathead | SAE 60 (20W-50 secondary) | SAE 60 (MVT secondary) | See AMSOIL lookup |
Look up your bike in AMSOIL’s guide
The core Harley product
AMSOIL 20W-50 100% Synthetic V-Twin Motorcycle Oil (MCV)
Best for: Harley-Davidson and other V-twin engines, transmissions and primary chaincases where 20W-50 is called for.
- Resists viscosity breakdown 6X better than Harley-Davidson SYN3 for better compensator and transmission gear protection (AMSOIL testing, CEC L45-KRL / ASTM D445)
- Resists extreme heat to help keep engines clean and efficient
- Reduces wear and deposits for maximum compression and power
- Wet-clutch compatible; one lubricant for all three sumps
Tip: Preferred Customers save up to 25%. Join at AMSOIL.com
AMSOIL 100% Synthetic V-Twin Transmission Fluid (MVT)
Best for: Any V-twin transmission that doesn’t share a sump with the engine: Harley-Davidson, Triumph and pre-2013 Indian.
- Precise frictional properties for smooth shifts
- Helps dampen loud thunks and quiet gear noise
- Resists shear and heat; extreme-pressure additives fight gear and bearing wear
Tip: Preferred Customers save up to 25%. Join at AMSOIL.com
AMSOIL 100% Synthetic V-Twin Primary Fluid (MVP)
Best for: Primary chaincases where you want a dedicated primary fluid (AMSOIL lists it as the alternative to 20W-50 for Evolution–Twin Cam primaries).
Tip: Preferred Customers save up to 25%. Join at AMSOIL.com
AMSOIL’s cross-reference to H-D fluids
| H-D product | AMSOIL replacement |
|---|---|
| Screamin’ Eagle SYN3 (99824-03) | MCV 20W-50 V-Twin Motorcycle Oil |
| Formula+ (99851-05) | MCV 20W-50 |
| HD engine oil SAE 60 (99816-60) | MCS SAE 60 or MCV 20W-50 |
| Primary Lube (99887-84) | MCV 20W-50 |
| Transmission Lube (99892-84) | MVT V-Twin Transmission Fluid or MCS SAE 60 |
| Sport-Trans Fluid (99896-88) | MCV 20W-50 |
| Type B / Type E fork oil | STM #10 Suspension Fluid |
Oil-change interval
AMSOIL recommends its V-twin oils at the interval in your motorcycle’s owner’s manual. Change the filter every time. AMSOIL also sells 4- and 5-quart V-twin oil change kits with a black or chrome filter; see the V-twin category.
Harley-Davidson, Screamin’ Eagle, SYN3, Sportster, V-Rod, Milwaukee-Eight, Triumph and Indian are trademarks of their respective owners, used only to identify compatible products. No affiliation or endorsement is implied.
Frequently asked questions
What AMSOIL oil should I use in my Harley?
Can I use one oil in all three holes?
Is AMSOIL V-twin oil safe for wet clutches?
How often should I change AMSOIL V-twin oil?
What viscosities does AMSOIL V-twin oil come in?
Sources
Product facts on this page come from AMSOIL’s official product pages and literature. Always follow your owner’s manual.